750-DI, Multi-Jaw Rotating Combination Pipe and Bench Vise, Swivel Base

Multi-Jaw Rotating Combination Pipe and Bench Vise, Swivel Base

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

  • Meets NSN 5120-01-520-9328
  • Made of Heavy Duty Ductile Iron
  • Vise is equipped with (3) three sets of replaceable, hardened steel jaws
  • Parallel serrated jaws, pipe jaws and V-jaws for holding both round & flat stock
  • Vise head rotates 360° with locking at every 30° or (12) twelve different locking positions
  • Vise body rotates 360° using interlocking V-grooved swivel base and (2) two lockdowns to lock at any position
  • Swivel base has (4) four 7/16" Dia. holes for securing vise base to a work bench (fasteners not included)
  • Large built-in anvil
  • No-pinch main screw handle

360° Product View

Regular Price: $349.00

Special Price: $278.00

Additional Information

Model # 750-DI
Item # 11750
Jaw Width (nominal inches) 5"
Jaw Opening (nominal inches) 5"
Throat Depth (nominal inches) 4"
Min Pipe Capacity (nominal inches) .125"
Max Pipe Capacity (nominal inches) 3.5"
Base Swivel
Material Ductile Iron
NSN NSN# 5120-01-520-9328 (5120015209328)
Packaging Dimensions 20" x 10" x 10.5"
Weight (lbs) 63
Warranty Download
Vise - Isometric Download
Vise - Layout N/A
Base Print Download
Serrated Machinist Jaws N/A
Serrated Pipe Jaws N/A
Owner's Manual Download
  1. Under Rated High Quality Vise Review by Toyo496

    After researching heavy duty 5" or larger vises for weeks I decided to purchase the Yost 750 DI. It is big, strong, heavy and very accurately tight through out its motions. I compared it to all the other multi jaw vises available through HD and other stores and the Yost 750 DI weighs 23 lbs more than any other multi jaw vise!!! 23 lbs more!!! And has a Lifetime warranty! I spent some time on Google Images comparing it to other vises and it is much bigger!
    When I revieved the box I was surprised to see how beefy and heavy duty it was constructed. All of the jaws are precision cut and have sharp serrations on them to hold what you are working on. The vise cycles through it's pases very smoothly. I was concerned that it would not compare to the the $600 plus Wilton and Snap On vises I use at work, but I was wrong!! I would take this vise over any of the 5 high dollar big name vises at my work. The quality is much better! I used four 5/8" grade 8 bolts to mount it. Keep in mind this thing weighs 70 lbs, so be careful and use help while mounting it to the bench. I truly think this is the best vise you can get for $200 or less.
    This vise really doesn't need any improvements, but if I where to make it a hair better, I would increase the diameter of the sliding handle a few millimeters (it has never bent, but I see similiar sized handles on other vises bend) and I would apply some form of clear coat to all of the machined surfaces to prevent any long term rust from setting in.
    I mounted this vise to a Semi truck brake drum filled with concrete, I welded casters on the side so that I could move the beast easily around the shop, overall weight is over 350 lbs! On the back side I have a JD2 Notchmaster tubing notcher mounted. (Posted on 3/18/15)

  2. Yost vice exceeds expectations! Review by Njoseven

    This vice was not a disappointment. I don't like buying things without seeing them, but I had to since the stores don't carry them. Rest assured you will like this vice if you get it. (Posted on 2/3/15)

  3. Great Review by Charles Van Vrancken

    Better than expected. (Posted on 1/19/15)

  4. Incredible value, best quality you will find for $200 Review by bmwman91

    I love this thing. As far as shop tools go, it is a general rule that anything that claims to be a multipurpose tool is going to be, at best, mediocre at all of the tasks it claims to work for. This vise is one of very few exceptions. The swiveling head is incredibly useful, and it is the highest quality vise I have seen at this price point. It is still no $1500 US-cast vise (and this one is NOT made in the US), but for $200 it is a tremendous value. The casting quality is visibly better than other ones you will see for the same price: no voids in the casting, no odd rough patches, the machined surfaces are cleanly milled and the powder coating is evenly applied. I did fully disassemble this vise when I got it and re-lubricate all of the sliding surfaces with some high quality grease, and I carefully filed some of the sliding surfaces because a little bit of powder paint got on to them, but other than that it is great.

    The only flaw I found was in the lead crew. The ACME threads were cut a little sloppily, so I stuck it into the lathe and cleaned up the thread faces with a fine triangular file. With that little clean-up task done, the lead screw turns nice and smooth. One other gripe, and it is a small one, is that the vise jaws will hit the mounting bolts if the jaws are oriented vertically and you are turning the thing about its vertical axis. It's easy enough to deal with, but I feel like it could sit a little higher to avoid that. One last note I have is about the locking pin for the vise jaw rotation. It is small, and make SURE that you have clamped the jaws down before smacking your workpiece around. That little pin looks like it will shear off pretty easily if you hammer on a loosely clamped workpiece. It has not happened to me (yet), but is seems plausible.
    (Posted on 12/30/14)

  5. You will not be Disappointed with the vise or the packaging. Great Vise. Review by Sandan

    I purchased this vise to replace an old six inch vise that I have had for over thirty years but it lacks functionality. I am very please with this Yost and it has all the functionality that I require. Excellent quality and very heavy. Apparently they heard the folks that complained about the shipping because it was in two heavy duty boxes with wood liner on the bottom and cardboard spacers to hold it in place. I don't think you could damage it if you dropped it off the truck. I was very impressed with the packaging. (Posted on 12/26/14)

  6. Tough Vise Review by Kyle

    This is as tough as they get. Very heavy duty vise with great versatility. Bi-axial rotation makes it perfect for all jobs. (Posted on 12/25/14)

  7. Solid, versatile, large., Review by Joel

    The instructions ask for at least a 2 inch thickness of wood to which to bolt it down with 5/8 inch bolts. It is built for that kind force. I added a couple of levels of plywood to my bench so I could take advantage of that. Even with that much force it doesn't wobble once the work is clamped in it. (Posted on 12/22/14)

  8. Best vise for homeowner by far! Review by Rennat "Rennat"

    I just got it yesterday and opened it. Installed it today. Fine craftsmanship and nicely finished blue paint. I have used a lot of vises and this one could be used in a commercial setting. Smooth rotation of all parts. Plus 60000 pound ductile iron. I would give it more stars if possible. Very happy and would buy again. Thank you Yost and Amazon. (Posted on 12/19/14)

  9. Garrett C Review by Multitasking heavyweight

    This thing is a beast!!! I absolutely love having 'someone' who never tires of holding my crap!!! Definitely a heavy-weight with it comes to a shop vice, but it's definitely worth the price! I love this model's versatility with flat and pipe jaws and 360 x & y axis (Posted on 12/17/14)

  10. use this on my welding table. just got it ..., Review by mark a turik

    use this on my welding table. just got it and it is mounted. the advantage of this yost is the 3-d positioning that i can now hold my work.
    really look forward to having this heavy vice in my work tool collection. (Posted on 12/3/14)

  11. Better than expected Review by Patrick

    This is just a great vise. It works well right out of the box. It was packaged well in both cardboard and wood. It may have had a scratch or two on it...but if you are planning on using your vise instead of looking at it then this is of no concern. I really only have room for one vise and this is multifunction. I have this in my shop at home, but I would feel comfortable with it in an industrial application. Five big stars, all the way. (Posted on 11/10/14)

  12. High quality, rugged! Review by joe winter

    Better than my friend's super expensive Wilton! (Posted on 6/25/14)

  13. Good vise. Review by Rich

    Good all around vise. Rotation of very easy.
    Yost has a good reputation (Posted on 6/14/14)

  14. DrewH Review by Awesome vise

    My vise came packed nicely, double boxed in a system that wouldn't allow it to move around much, and it also had a piece of wood that protects the feet. There isn't a scratch on it. I do agree though, if you did have trouble, you wouldn't want to have to pay return shipping. No regrets from me though, this thing looks great, and works great! (Posted on 6/12/14)

Write Your Own Review

You're reviewing: Multi-Jaw Rotating Combination Pipe and Bench Vise, Swivel Base

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars